TOLL FREE NUMBER: 1800 120 5931
Features and benefits
| Axle/Suspension | Leaf spring |
| Tires - Option One | 445/50 R22.5 |
| Frame Description | Four independent hydraulic jacklegs |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm) |
| Head/Tail Pulley Type | 8-in (20.3-cm) crowned |
| Head Pulley Bearing | 1.75-in (4.4-cm) double roller |
| Rubber Flashing | Adjustable corded rubber |
| Idler Type | 4 in (10.2 cm) CEMA "B" straight |
| Self-Cleaning Return Idlers | (3) 4-in (10.2-cm) rubber disc |
| Collecting conveyor frame | Part of trailer frame |
| Make and Model | CAT 3.6L Tier 4F (Stage V) |
| Engine Rating | 120 hp (90 kW) |
| Fuel Consumption | 3 gph (11.4 L/hr) |
| Battery | 950 CCA |
| Oil Filter | Spin-on |
| Recommended Oil | Mobil 15W40 |
| System Voltage | 12-V, 120-amp alternator |
| Air Cleaner | Dual element |
| Radiator Fan | Suction |
| Troughing Idler Type | 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in (101.6-cm) centers |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm) smooth |
| Conveyor Belt Stacking Height | 10.5 ft (3.2 m) (conveyor @ 30 deg) |
| Fines Conveyor Frame | Engineered structural frame |
| Head Pulley Type | 8-in (20.3-cm) crowned |
| Self-Cleaning Tail Pulley Dimensions | 8-in (20.3-cm) diameter, 38-in (96.5-cm) wide, crowned wing pulley, 1.75-in (4.4-cm) shaft |
| Self-Cleaning Return Idlers | (3) 4-in (10.2-cm) diameter |
| Head Pulley Bearing | 1.5-in (3.8-cm) pillow block |
| Capacity | 180 yd³ (137.6 m³) per hour with 0.5-in (1.3-cm) screens installed and material with moisture less than 40% |
| Hopper Height | 9.5 ft (2.9 m) from ground level at operating incline |
| Hopper Opening | 11.7 ft x 5.3 ft (3.6 m x 1.6 m) |
| Apron Conveyor Rollers | 5 in (12.7 cm) CEMA "D" x 17 |
| Apron Conveyor Speed | 0-15 ft/min |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm) smooth |
| Conveyor Belt Stacking Height | 12.5 ft (3.8 m) (conveyor @ 30 deg) |
| Head Pulley Type | 8-in (20.3-cm) crowned |
| Head Pulley Bearing | 1.5-in (3.8-cm) pillow block |
| Troughing Idler Type | 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers |
| Self-Cleaning Tail Pulley Dimensions | 8-in (20.3-cm) diameter, 32-in (81.3-cm) wide, crowned wing pully, 1.75-in (4.4-cm) shaft |
| Self-Cleaning Return Idlers | (5) 4-in (10.2-cm) diameter |
| Fines Conveyor Frame | Engineered structural frame |
| Head Pulley Bearing | 1.5-in (3.8-cm) pillow block |
| Overs Conveyor Frame | Engineered structural frame |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm) cleated |
| Conveyor Belt Size | 42 in (106.7 cm) |
| Self-Cleaning Tail Pulley Dimensions | 8-in (20.3-cm) diameter, 44-in (111.8-cm) wide, crowned wing pulley, 1.75-in (4.4-cm) shaft |
| Conveyor Belt Stacking Height | 9 ft (2.74 m) (conveyor @ 25 deg) |
| Head Pulley Type | 8-in (20.3-cm) crowned |
| Self-Cleaning Return Idlers | (2) 4-in (10.2-cm) diameter, (1) 5-in (12.7-cm) "rattle roller" |
| Troughing Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 32-in (81.3-cm) centers |
| Brush Assembly Support | (2) 1.25 in (3.2 cm) sealed ball bearings/brush |
| Bristle Material | Polyethylene |
| Drum Operation | 0-35.9 gpm (0-135.9 L/min) |
| Drum Speed | 0-25 rpm |
| Drum Motor | 35.5 in³ (630 cm³) displacement |
| Drum Angle Adjustability | 0-5 deg |
| Drum Drive Chain | 140 extended pin/extended width |
| Drum Support Description | 8 polyurethane trunnion wheels on pivoting bogeys 8 in x 4 in (20.3 cm x 10.2 cm) wide |
