TOLL FREE NUMBER: 1800 120 5931
Features and benefits
| Axle/Suspension | Leaf spring |
| Tires - Option One | 235-75R 17.5H qty. 4 |
| Frame Description | 4 independent hydraulic jacklegs |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Head/Tail Pulley Type | Rubber-lagged, 12 in (30.5 cm ) diameter, 38 in (99.65 cm) wide |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Rubber Flashing | Adjustable, 0.25 in (6.44 cm) thick, 4 in (10.2 cm) |
| Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (20.96 cm) centers |
| Self-Cleaning Return Idlers | 6, each 4 in (10.2 cm) diameter |
| Fines Conveyor Frame | Part of trailer frame |
| Troughing Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (60.96 cm) centers |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 16.6 ft (5.1 m) with drum at 4 deg |
| Fines Conveyor Frame | 4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing |
| Rubber Flashing | Adjustable, 0.25 in (0.64 cm) thick, 4 in (10.16 cm) |
| Head Pulley Type | Rubber lagged, 12 in (30.5 cm) diameter, 38 in (99.65 cm) wide |
| Self-Cleaning Tail Pulley Dimensions | 10 in (25.4 cm) diameter, 38 in (96.5 cm) wide with 2.4 in (6.1 cm) shaft |
| Self-Cleaning Return Idlers | 11, each 4 in (10.2 cm) diameter |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Conveyor Belt Type | 150 lb (99.8 kg), 2-ply, 1/32 in x 1/32 in (0.8 mm x 0.8 mm), vulcanized |
| Head/Tail Pulley Type | Rubber lagged, crowned, 9.75 in (24.8 cm) diameter, 32 in (81.3 cm) wide |
| Head Pulley Bearing | 1.94 in (4.9 cm) pillow block |
| Idler Type | 30 degrees CEMA "B" with permanently sealed bearings spaced at 41 in (104 cm) centers |
| Self-Cleaning Return Idlers | 4, each 4 in (10.2 cm) diameter |
| Fines Conveyor Frame | 2 in x 8 in (5.1 cm x 20.3 cm) structural steel building |
| Capacity | Approximately 200 cu yd (152.9 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40% |
| Hopper Height | 9.5 ft (2.9 m) from ground level at operating incline |
| Hopper Opening | 13.2 ft x 5.3 ft (4 m x 1.6 m) |
| Apron Conveyor Rollers | 4 in (10.2 cm) diameter qty. 14 |
| Apron Conveyor Speed | 0-35 fpm (0-10.7 m/min) |
| Operation | 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) |
| Make and Model | Siemens |
| Motor rating | 150 hp, 1800 rpm, 460 V, 3 phase |
| System Voltage | 460 V |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Overs Conveyor Frame | 4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Conveyor Belt Size | 48 in (121.9 cm) wide with raised cleat |
| Solid Return Idler Size | 4-in diameter |
| Self-Cleaning Tail Pulley Dimensions | 10 in (25.4 cm) diameter, 51 in (129.5 cm) wide with 2.4 in (6.1 cm) shaft |
| Conveyor Belt Stacking Height | 3 ft (0.9 m) x 10 ft (3.1 m) |
| Head Pulley Type | Rubber lagged, 12 in (30.5 cm) diameter, 51 in (99.65 cm) wide |
| Conveyor Belt Size | 48 in (121.9 cm) wide with raised cleat |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 3 ft (0.9 m) x 12.5 ft (3.8 m) |
| Head Pulley Type | Rubber lagged, 12 in (30.5 cm) diameter, 51 in (99.65 cm) wide |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Self-Cleaning Tail Pulley Dimensions | 10 in (25.4 cm) diameter, 51 in (129.5 cm) wide with 2.4 in (6.1 cm) shaft |
| Overs Conveyor Frame | 2 in x 8 in (5.1 cm x 20.3 cm) structural steel tubing |
| Rubber disc return idler size | 4 in diameter |
| Rattler roller return idler size | 5.4 in diameter |
| Brush Assembly Support | Two 1.25-in (3.2-cm) sealed ball bearings |
| Bristle Material | Polyethylene |
| Drum Operation | 0-42.6 gpm (161.3 L/min) |
| Drum Speed | 0-24 rpm |
| Drum Motor | 48.8 cu in (800 cu cm) displacement |
| Drum Angle Adjustability | 0-7 degrees |
| Drum Drive Chain | 140 WT |
| Drum Support Description | Four steel trunnion rollers 8 in (20.3 cm) diameter, 4 in (10.2 cm) width |
