Vermeer HDD Machine Is Available For Sale

Powerful workhorse making short work of processing material.

Features and benefits

Axle/Suspension	Leaf spring
Tires - Option One	235-75R 17.5H qty. 4
Frame Description	4 independent hydraulic jacklegs

Conveyor Belt Type	220 lb (99.8 kg), 2-ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Head/Tail Pulley Type	Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Head Pulley Bearing	2.5" (6.4 cm) pillow block
Rubber Flashing	Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm)
Idler Type	20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
Self-Cleaning Return Idlers	6, each 4" (10.2 cm) diameter
Fines Conveyor Frame	Part of trailer frame

Make and Model	John Deere PowerTech PVX 4.5L, 4045HFC93 Tier 4F
Engine Rating	134 hp (93.2 kW) @ 2400 rpm, 398 ft-lb (531.6 Nm) of torque @ 1600 rpm
Fuel Consumption	3.5 gph (13.3 L/hr) under most operating conditions
Battery	950 cold cranking amps
Oil Filter	Spin-on
Recommended Oil	Mobil 15/40
System Voltage	12 V, 120 amp alternator
Air Cleaner	Dual element oversized
Radiator Fan	Suction-type

Make and Model	John Deere 4045H Tier 3
Engine Rating	125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm
Fuel Consumption	3.5 gph (13.3 L/hr) under most operating conditions
Battery	950 cold cranking amps
Oil Filter	Spin-on
System Voltage	12 V, 120 amp alternator
Air Cleaner	Dual element oversized
Radiator Fan	Pusher type

Troughing Idler Type	20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
Conveyor Belt Type	220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height	16.6' (5.1 m) with drum at 4 degrees
Fines Conveyor Frame	4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
Rubber Flashing	Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
Head Pulley Type	Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
Self-Cleaning Tail Pulley Dimensions	10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
Self-Cleaning Return Idlers	11, each 4" (10.2 cm) diameter
Head Pulley Bearing	2.5" (6.4 cm) pillow block

Conveyor Belt Type	150 lb (99.8 kg), 2 ply, 1/32" x 1/32" (.8 mm x 0.8 mm), vulcanized
Head/Tail Pulley Type	Rubber lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide
Head Pulley Bearing	2.5" (6.4 cm) pillow block
Idler Type	30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers
Self-Cleaning Return Idlers	4, each 4" (10.2 cm) diameter
Fines Conveyor Frame	2" x 8" (5.1 cm x 20.3 cm) structural steel building

Capacity

Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%

Hopper Height	9.5' (2.9 m) from ground level at operating incline
Hopper Opening	13.2' x 5.3' (4 m x 1.6 m)
Apron Conveyor Rollers	4" (10.2 cm) diameter qty. 14
Apron Conveyor Speed	0-35 fpm (0-10.7 m/min)

Operation

62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa])

Head Pulley Bearing	2.5" (6.4 cm) pillow block
Overs Conveyor Frame	4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
Conveyor Belt Type	220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor Belt Size	48" (121.9 cm) wide with raised crescent
Solid Return Idler Size	4" x 8" diameter
Self-Cleaning Tail Pulley Dimensions	10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft
Conveyor Belt Stacking Height	3' (.9 m) x 10' (3.1 m)
Head Pulley Type	Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide

Brush Assembly Support	Two 1.25" (3.2 cm) sealed ball bearings
Bristle Material	Polyethylene

Drum Operation	0-42.6 gpm (161.3 L/min)
Drum Speed	0-24 rpm
Drum Motor	48.8 cu in (800 cu cm) displacement
Drum Angle Adjustability	0-7 degrees
Drum Drive Chain	140 WT
Drum Support Description	Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width