TOLL FREE NUMBER: 1800 120 5931
Features and benefits
| Axle/Suspension | Single leaf sprung |
| Tires - Option One | 445/50R22.5 |
| Frame Description | Heavy-duty structural tubing |
| Troughing Idler Type | 20-deg CEMA "B" with permanently seated bearings |
| Conveyor Belt Type | 220-lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional |
| Conveyor Belt Stacking Height | 15 ft |
| Fines Conveyor Frame | 2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing |
| Head Pulley Type | Rubber-lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width |
| Self-Cleaning Tail Pulley Dimensions | 10-in (25.4-cm) diamater, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft |
| Self-Cleaning Return Idlers | 4-in (10.2-cm) rubber disc, qty 8 |
| Head Pulley Bearing | 2 7/16-in (6.2-cm) pillow block |
| Capacity | 100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40% |
| Hopper Height | 9.5 ft (2.9 m) |
| Hopper Opening | 34-in tall x 37-in wide |
| Make and Model | Siemens |
| Motor rating | 480 VAC, 3 Phase, 60 Hz, 60 hp (44.7 kW), 177 lb-ft (240 Nm) at 1800 rpm |
| System Voltage | 12 V |
| AC panel | 75 hp, 480 VAC, soft start |
| Head Pulley Bearing | 2 7/16-in (6.2-cm) pillow block |
| Conveyor Belt Type | 220 lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional |
| Conveyor Belt Size | 36 in |
| Self-Cleaning Tail Pulley Dimensions | 10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft |
| Conveyor Belt Stacking Height | 7 ft (2.1 m) |
| Head Pulley Type | Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width |
| Conveyor Belt Size | 36 in |
| Conveyor Belt Type | 220 lb, 2 ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional |
| Conveyor Belt Stacking Height | 13.75 ft (4.2 m) |
| Head Pulley Type | Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width |
| Head Pulley Bearing | 2 7/16-in (6.2-cm) pillow block |
| Self-Cleaning Tail Pulley Dimensions | 10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft |
| Brush Assembly Support | Two 1.25-in (2.3-cm) sealed ball bearings |
| Bristle Material | Polyethylene |
| Drum Operation | 0-30.9 gpm (0-117 L/min) |
| Drum Speed | 0-24 rpm |
| Drum Angle Adjustability | 0-7 deg |
| Drum Drive Chain | 140 custom extended pin |
| Drum Support Description | Eight poly trunnion rollers 8-in (20.3-cm) diameter, 4-in (10.2-cm) wide |
