TOLL FREE NUMBER: 1800 120 5931
The TR5300 trommel screen is ideal for operations where high productivity in a compact size is demanded. The tensioned screen and drum are designed for optimum productivity, offering simple adjustments and maintenance. The ability for the conveyors to go parallel to the ground gives the operator more control over dust and wind, while also allowing for easier maintenance. The TR5300 features a maintenance access platform for the Deutz TD 2.9L Tier 4 Final (Stage IV), 74 hp (55 kW) engine.
Features and benefits
| Axle/Suspension | Single Leaf Sprung |
| Tires - Option One | 445/50R22.5 |
| Frame Description | Heavy Duty Structural Tubing |
| Make and Model | Deutz TD2.9L Tier 4 Final/ Stage IV |
| Engine Rating | 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm |
| Fuel Consumption | 4.6 |
| Battery | 950 Cold Cranking Amp Group 31 |
| Oil Filter | Spin-on |
| Recommended Oil | Mobil 15W40 |
| System Voltage | 12 |
| Air Cleaner | Dual element |
| Radiator Fan | Suction |
| Troughing Idler Type | 20° CEMA "B" with permanently sealed bearings |
| Conveyor Belt Type | 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option |
| Conveyor Belt Stacking Height | 15' |
| Fines Conveyor Frame | 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (96.5 cm) wide |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Self-Cleaning Return Idlers | 4" (10.2 cm) rubber disc, qty 8 |
| Head Pulley Bearing | 2 7/16" (6.2 cm) pillow block |
| Capacity | 100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40% |
| Hopper Height | 9.5 |
| Hopper Opening | 34x37 |
| Head Pulley Bearing | 2 7/16" (6.2 cm) pillow block |
| Conveyor Belt Type | 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option |
| Conveyor Belt Size | 36 |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Conveyor Belt Stacking Height | 6' |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Brush Assembly Support | Two 1.25" (3.2 cm) sealed ball bearings |
| Bristle Material | Polyethylene |
| Drum Operation | 0-30.9 gpm (0-117.0 L/min) |
| Drum Speed | 0-24 RPM |
| Drum Angle Adjustability | 0-7 degrees |
| Drum Drive Chain | 140 custom extended pin |
| Drum Support Description | Eight poly trunnion rollers 8" (20.3 cm) diameter 4" (10.2 cm) width |
