TOLL FREE NUMBER: 1800 120 5931
The TR521 Tier 4F Stage IV trommel screen is specifically designed to separate by size a wide variety of materials such as compost, soil, sands, gravel, light aggregate and sludge. Screen enhancements to the drum enable quicker and simpler changeout and tensioned screens allow for increased overall open screen area. The revamped TR521 with wireless remote control offers intelligence to the machine for operational setting control and allows the operator to monitor from a loader cab or distant location.
Features and benefits
| Axle/Suspension | Leaf spring |
| Tires - Option One | 235-75R 17.5 H qty 8 |
| Frame Description | Four independent hydraulic jacklegs |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm) |
| Head/Tail Pulley Type | Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Rubber Flashing | Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm) |
| Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (61 cm) centers |
| Self-Cleaning Return Idlers | 7, each 4" (10.2 cm) diameter |
| Fines Conveyor Frame | Part of trailer frame |
| Make and Model | Cummins QSB 3.8l Tier 4 Final |
| Engine Rating | 120 hp |
| Fuel Consumption | 3.1 gph (11.7 L/hr) |
| Battery | 950 CCA |
| Oil Filter | Spin-on |
| Recommended Oil | Mobil 15W40 |
| System Voltage | 12 V, 134 amp alternator |
| Air Cleaner | Dual element |
| Radiator Fan | Suction |
| Troughing Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers |
| Conveyor Belt Type | 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 14.5' with drum at 4 degree |
| Fines Conveyor Frame | 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing |
| Rubber Flashing | Adjustable, .25" (.64 cm) thick, 4" (10.16 cm) |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Self-Cleaning Return Idlers | 7, each 4" (10.2 cm) diameter |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Conveyor Belt Type | 150 lb (99.8 kg), 2-ply, 1/32" x 1/32" (.8 mm x .8 mm), vulcanized |
| Head/Tail Pulley Type | Rubber-lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Rubber Flashing | Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm) |
| Idler Type | 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104.1 cm) centers |
| Self-Cleaning Return Idlers | 4, each 4" (10.2 cm) diameter |
| Fines Conveyor Frame | 2" x 8" (5.1 cm x 20.3 cm) structural steel building |
| Capacity | Approximately 150 cu yd (114.7 m³) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40% |
| Hopper Height | 9.5' (2.9 m) from ground level at operating incline |
| Hopper Opening | 13.2' x 5' (4 m x 1.5 m) |
| Apron Conveyor Rollers | 6" (10.2 cm) diameter qty. 13 |
| Apron Conveyor Speed | 0-35 fpm (0-10.7 m/min) |
| Operation | 62.9 gpm @2500 psi (238.1 L/min @ 172.4 bar) |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Overs Conveyor Frame | 2.3" x 8" (5.7 cm x 20.3 cm) structural steel channel tubing |
| Conveyor Belt Type | 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) |
| Conveyor Belt Size | 36" (91.4 cm) wide with raised crescent |
| Solid Return Idler Size | 4" (10.2 cm) diameter |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Conveyor Belt Stacking Height | 3' (.9 m) x 10' (3.1 m) |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Brush Assembly Support | Two 1.25" (3.2 cm) sealed ball bearings |
| Bristle Material | Polyethylene |
| Drum Operation | 0-33.1 gpm (0-125.3 L/min) |
| Drum Speed | 0-24 rpm |
| Drum Motor | 48.8 cu in (800 cu cm) displacement |
| Drum Angle Adjustability | 3-5 degrees |
| Drum Drive Chain | 120 WT |
| Drum Support Description | Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width |
