
Features and benefits
| Brake Type | Spring-applied and hydraulically released dual parking brakes |
| Control Station Description | Swing-out |
| Operator Vision Shield Description | Abrasion-resistant coated polycarbonate |
| Lower Gearbox | Straight bevel |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil |
| Driveshaft | 2 universal joints |
| Oil Type | SAE 75W90 synthetic gear oil |
| Driveshaft - U Joints | Two standard with double lip seal |
| Upper Gearbox | Straight bevel |
| Number of Indexes | 2 |
| Number of Teeth | 30 |
| Tooth Description | Yellow Jacket cutter system |
| Number of Pockets | 30 |
| Cutterwheel Guard | Standard |
| Reversible Pockets/Teeth | 30 |
| Radio Remote Control | Optional, wireless |
| Switches | Boom swing, boom height, creep propel, ignition, clutch, track gage, track speed range, SmartSweep, throttle |
| Battery | 950 CCA |
| System Voltage | 12 |
| Display | Multifunction display (MFD); Displays - hours, fuel level, engine speed, engine faults and engine status |
| Controller | Vermeer C248 with SmartSweep |
| Shutdown System | High engine temperature and low oil pressure |
| Warning Lights | Engine faults |
| Oil Filter | Spin-on |
| Make and Model | CAT C2.2 turbocharged Tier 4 final/Stage V Diesel |
| Fan | 16.5 in (40.7 cm) |
| Clutch Type | Electric clutch with brake |
| Cooling Medium | Water/Antifreeze |
| Alternator | 85A |
| Recommended Oil | 10W-30 |
| Air Cleaner | Dry-type, restriction indicator, evacuator valve, safety element |
| Fuel Type | Ultra-low sulfur diesel |
| Filtration Method | Full-flow 4 micron return filter, suction strainer |
| Recommended Oil Type | Vermeer Hypower 68 |
| System Type | Tandem gear pump, pressure balanced |
| Directional Control | Yes |
| Flow Control | Yes |
| Sensor Type | Capacitive |
| Description | Yes |
| Visual Interface | Yes |
| Quantity/Location | 2 |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |
| Radio Remote Control | Optional |
| Remote Display | LCD with remote control and machine functions status |
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode, track speed range, SmartSweep |
| Track Frame Description | Tube and plate |
| Track Drive Motor Type | Integral motor and planetary unit |
| Track Type | 9-in (22.9-cm) rubber iron core |
| Track Brake Type | Integrated into motor/planetary unit |
| Pump Flow at Maximum RPM | 9 gpm |
| Track Drive Pump Type | Tandem gear pump, pressure balanced |
| Track Length on Ground | 51.2 in |
| Track Width - Retracted | 35 in |
| Track Width - Extended | 51 in |
| System Relief Pressure | 2900 psi (200 bar) |