TOLL FREE NUMBER: 1800 120 5931
Features and benefits
| Frame Description | Welded tube and plate steel |
| Brake Type | Spring-applied, hydraulic release at rear motors |
| Fender Description | Yes |
| Tires - Option One | 5.7 in x 8 in (14.5 cm x 20.3 cm) dual standard |
| Axle/Suspension | Rigid/fixed (rear) |
| Steerable Axle Type | Hydraulic steering oscillating axle |
| Control Station Description | Fixed side |
| Toolbox Description | Standard |
| Cutterwheel Shaft | 1.8 |
| Jackshaft Dimension | 1.3 |
| Number of Secondary Belts | 6 banded |
| Bearing Dimensions | 1.3 bore |
| Bearing Dimensions - Secondary Belt | 1.8 |
| Belt Type | V-belt |
| Number of Primary Belts | 2 individual (matched pair) |
| Jackshaft Bearing Type | Sealed ball |
| Number of Teeth | 18 |
| Tooth Description | Vermeer cutting system (VCS) |
| Cutterwheel Guard | Standard |
| Reversible Pockets/Teeth | 16 |
| Tooth Description | Yellow Jacket™ cutter system |
| Number of Teeth | 20 |
| Cutterwheel Guard | Standard |
| Number of Indexes | 2 |
| Number of Pockets | 20 |
| Reversible Pockets/Teeth | 20 |
| Switches | Two-speed 2x4 and 4x4 ground drive, cutterwheel engage/disengage, blade (if equipped) |
| Battery | 550 CCA |
| System Voltage | 12 V |
| Controller | Danfoss® |
| Shutdown System | Engine low oil pressure will derate engine |
| Warning Lights | Oil pressure, engine fault, operator presence status, clutch engage/disengage status |
| Oil Filter | Spin-on |
| Make and Model | Briggs & Stratton Vanguard® EFI/ETC |
| Clutch Type | Electric clutch with brake |
| Cooling Medium | Air |
| Alternator | 20/50 Amp (rpm-based) |
| Recommended Oil | 10W30 (see engine manual) |
| Air Cleaner | Dry-type safety element and restriction indicator |
| Fuel Type | Gasoline |
| Sound Power | 107.6 dB(A) |
| Filtration Method | 10-micron fill strainer and 6-micron return filter |
| Recommended Oil Type | Vermeer HyPower 68 |
| System Type | Open-loop series system |
| Directional Control | Electric over hydraulic |
| Flow Control | SmarSweep |
| Chip Blade Dimension | 33-in wide x 12-in tall (83.8 cm x 30.5 cm) |
