TOLL FREE NUMBER: 1800 120 5931
Features and benefits
| Frame Description | Unit body construction |
| Millbox Opening | 60-in (152.4-cm) wide x 31-in (78.7-cm) high |
| Bearing Type | Double row spherical roller |
| Depth of Cut | Adjustable: .125 in (.31 cm) to 1 in (2.5 cm) |
| Number of Knives | 12 |
| Knife Thickness | .625 in (16 mm) |
| Useable Edges | One |
| Material | A8 mod chipper steel |
| Number of Bolts/Knife | Two |
| Replaceable Threaded Knife Block | Yes |
| Number of Pockets | 12 |
| Shaft Retention Type | Keyless bushing |
| Operational Faults | Yes |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Gauges | No |
| Switches | Sealed membrane CAN bus keypad |
| System Relief Pressure | 2,900 psi (200 bar) |
| System Type | Open-loop |
| Pump Type | Fixed displacement gear pump |
| Motor Series | TH |
| Splice | R2 stainless steel cable |
| Belt Design | 3-ply - 330# with V-cleat |
| Return Roller Quantity | 3 |
| Idler Roller Bearing | 1-15/16, 4-bolt flange |
| Drive Motor | Fixed displacement |
| Millbox Opening | 60-in (152.4-cm) wide x 30.5-in (77.5-cm) high |
| Bearing Type | Double row spherical roller |
| Number of Hammers | 9 |
| Number of Tips | 18 |
| Center Retention Pin Dimensions | 2-in (5-cm) diameter x 75.3-in (191-cm) long |
| Number of Wipers | Four spiral fan |
| Tip types | 18 |
| System Voltage | 24 V |
| Battery | 8D-MHD, 1400 CCA (qty. 2) |
| System Protection | Fused |
| Make and Model | CAT® C13B T4F/Stage V |
| Fuel Type | Ultra-low sulfur diesel (<15 ppm) |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | API CK-4, 10W-30 |
| Cooling Medium | Liquid (nitrite-free, pre-diluted 50/50) |
| Alternator | 24 V 270 A |
| Fan | Flexxaire® (variable pitch) |
| Clutch Type | Hydraulic-operated twin disc |
| Clutch Engagement | Push button |
| Drive Belt Type | V-belt |
| Sound Power | 112.7 dB(A) |
| Fan - CAC | Electric (variable speed) |
| Air to boil temperature | 126 F (52 C) |
| Make and Model | CAT® C13A Tier 3/Stage IIIA |
| Fuel Type | Diesel |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | API CH-4, 10W-30 |
| Cooling Medium | Liquid (nitrite-free, pre-diluted 50/50) |
| Alternator | 24 V 270 A |
| Fan | Flexxaire® (variable pitch) |
| Clutch Type | Hydraulic-operated twin disc |
| Clutch Engagement | Push button |
| Drive Belt Type | V-belt |
| Sound Power | 112.8 dB(A) |
| Air to boil temperature | 132 F (55 C) |
| Number of Coolers | 1 |
| Recommended Oil | Vermeer HyPower 68 |
| Filtration Method | Single in-tank return filter |
| Components | Dual PVG-32 valves |
| System Type | Open-loop, pressure and flow compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 25.3 gpm (96.5 L/min) |
| System Relief Pressure | 3,000 psi (206.8 bar) |
| Preventative Maintenance | Yes |
| Screens | Yes |
| Special Tools Group | Yes |
| Extended Warranty | Yes |
| Special Paint | Yes |
| Tips | Yes |
| Magnetic discharge conveyor pulley | Yes |
| Vermeer Confidence Plus Asset Protection Program | Yes |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Gauges | No |
| Switches | Sealed membrane |
| Operating Range | 300 ft (91.4 m) |
| Battery Type | AA (qty. 6) |
| Channel Setting | 50 channels |
| Radio remote type | LCD |
| Thrown Object Deflector | Standard |
| Deflector Position | Variable |
| Curtain description | Rubber |
| Number of Screens | Two |
| Screen Dimensions | .75-in (1.9-cm) thick |
| Screen Type | Abrasion-resistant steel |
| Number of Sides | One |
| Millbox Lid Liner Dimensions | 62-in (157.4-cm) wide x 21.5-in (54.6-cm) high x 16-in (40.6-cm) radius |
| Anvil Type | Adjustable - replaceable wear surfaces |
| Anvil Dimensions | 6.1-in (15.6-cm) high x 73.5-in (186.7-cm) long x 13.6-in (34.5-cm) wide |
| Screen Weight | Varies |
| Millbox lid liner | Abrasion-resistant steel |
| Flare Construction | Integrated with bolt-on corner flare |
| Feed Conveyor Type | Welded slat chain |
| Material Construction | Steel |
| Drive Type | Fixed displacement motor |
| Drive Roller Construction | Welded steel |
| Front Idler Roller Construction | Self-cleaning auger |
| Infeed Floor Construction | Welded steel |
| Material Type | Steel |
| Tooth Design | Serrated bars |
| Number of Teeth | 10 |
| Drive Motor | Fixed displacement motor/planetary |
| Drive Planetary | 34.2:1 |
| Feed Roller Down Pressure | Adjustable |
| Feed opening | 60 in x 30 in (152.4 cm x 76.2 cm) |
| Track Drive Motor Type | Two-speed bent axis axial piston |
| Track Type | D4 triple or double grouser |
| Track Drive Pump Type | Closed-loop |
| Track Brake Type | Hydraulic release |
| Track Length on Ground | 10.9 ft (3.3 m) |
| Track Width - Option One | 18 in (45.7 cm) |
| Type of Idler | D4 track roller |
