TOLL FREE NUMBER: 1800 120 5931

BC900XL Brush Chipper

‚ÄčThe Vermeer BC900XL brush chipper was designed to eliminate the guesswork out of chipping for smooth chipping performance.

Able to chip heavily branched material up to 9 in (22.9 cm) in diameter and 14 in (35.6 cm) wide, the BC900XL is ideal for line clearing and general cleanup needs. In combination, the Vermeer-exclusive SmartFeed system, and its 35 hp (26.1 kW) Briggs and Stratton gas engine, pulls in and processes difficult material.

Features and benefits

Fender DescriptionBolt-on
Hitch TypePintle or ball
Frame Description3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm)
Tongue Description3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube
Manufacturer - Option TwoDexter
Axle/Suspension - Option Two3500 lb (1587.6 kg) with electric brakes
Tires - Option OneST215/75R14
Axle/Suspension3500 lb (1587.6 kg)
Capacity - Option One3500 (1587.6 kg)
Manufacturer - Option OneDexter
Type - Option OneRubber torsional
Wheels - Option One14" (35.6 cm)
Type - Option TwoRubber torsional
Belt Idler/TensionerYes
Belt TypeChipper - Polyester Cord with wrap
TypeDual spherical roller
Rotation TypeManual dual handles with pin lock
Rotational LockYes
Bedknife - Number of Useable Edges2
Bedknife Size5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical
Fixture MethodBolt-on
Number of Paddles2
Knife Size5" x 11.75" (12.7 cm x 29.8 cm)
Safety Lock - Number of Positions6
Speed1500 rpm
Replaceable Threaded Knife BlockYes
Number of Bolts/Knife5
Useable Edges2
Bedknife MaterialGrade 50
MaterialA8 chipper steel
BatteryGroup 24 - 580 CCA
Standard GaugesHour meter
System Voltage12 V
ControllerVermeer ACS
Shutdown SystemEngine
Oil FilterSpin-On
Make and ModelBriggs and Stratton Vanguard
Clutch Drive EngagementClutchless PTO
Cooling MediumAir
Alternator20 amp
Recommended Oil10W30
Air CleanerEngine-mounted
Fuel TypeGasoline
Feed Roller Dimension15.8" dia x 13.5" long (40 cm x 34.3 cm)
Motor ManufacturerWhite
Number of Feed Roller Motors1
Feed Roller OrientationHorizontal
Number of Feed Rollers1
Feed Roller Clamp TypeSpring/weight
Motor Displacement33.1 CID
Infeed Throat Capacity9 in x 14 in (22.9 cm x 35.6 cm)
Filtration Method10 micron return
Recommended Oil TypeVermeer VMF Gold
System TypeTandem Center
Special PaintYes
Extended WarrantyYes
Preventive MaintenanceYes
Four Position Feed Control BarStandard
Bottom Feed Stop BarStandard
Green Hold to Run ButtonStandard
Reset MethodDual green hold-to-run buttons
PositionsFour positions: Emergency stop, forward, stop and reverse
Bottom Feed Stop Bar Material Thickness11 GA