TOLL FREE NUMBER: 1800 120 5931

BC2100XL Tier 4 Final Brush Chipper

The Vermeer BC2100XL brush chipper is powered by a 275-hp (205-kW) Tier 4 Final diesel engine to tackle the toughest land-clearing projects.

With a 21-in (53.3-cm) capacity and the largest infeed table in its class, the BC2100XL allows for smooth material feeding. Offset horizontal feed rollers have theoretical combined 10,000 lb (4536.9 kg) of pulling force and allow for easier feeding of material and less need for manual control of the upper feed roller when chipping large-diameter material. The exclusive SmartCrush system provides increased down pressure on the material being fed and assists when feeding forked or branchy material.

Features and benefits

Fender DescriptionBolt-on
Hitch Type3 " (7.6 cm) pintle
Frame Description2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
Toolbox DescriptionLockable
Tongue ExtensionTwo position 12" extension (30.5 cm)
Tongue Description2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm)
Tires - Option One17.5" x 6.75" B.C. of 8 on 6.5" (16.5 cm)
Axle/SuspensionTandem torsion 8000 lb (3628.7 kg) capacity
Capacity - Option One235/75R17.5 load range J
Manufacturer - Option OneDexter
Type - Option OneTandem torsion
Trailer Light TypeLED
Brake TypeElectric
Belt Idler/TensionerTorsion arm spring-loaded
Belt Type5V chipper poly type
TypeSpherical roller
Rotation TypeHydraulic
Bedknife - Number of Useable Edges4
Bedknife Size3 " x 27.5 " (7.6 cm x 69.9 cm)
Fixture MethodWeld-on
Number of Paddles4
Knife Size5 " x 14 " (12.7 cm x 35.6 cm)
Safety Lock - Number of Positions4
Speed1084 rpm
Replaceable Threaded Knife BlockYes
Number of Bolts/Knife6
Useable Edges2
MaterialA8 chipper steel
Radio Remote ControlEngine speed, discharge chute, forward, stop, reverse feed, Smart Crush down pressure level, SmartFeed droop setting and engine stop.
SwitchesEngine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system
Battery2 - 950 CCA
Standard GaugesTachometer, hour meter, coolant temperature, engine oil pressure, battery voltage, engine fault code, engine shutdown light and engine fault warning light
System Voltage12 volts
Shutdown SystemCoolant temperature, intake manifold temperature, oil pressure
Oil FilterSpin-on
Make and ModelCummins QSB 6.7 L Tier 4 Final
Clutch Drive EngagementClutchless PTO
Fan26" (66 cm) suction
Cooling MediumLiquid
Alternator130 amp Delco-Remy 245I
Recommended OilAPI CJ-4
Air CleanerDF900P Series Fleetguard Direct Flow with integral precleaner and secondary element
Fuel TypeUltra-low sulfur diesel
Feed Roller Dimension19 " (48.3 cm)
Motor ManufacturerEaton
Feed Roller OrientationHorizontal
Number of Feed Rollers2
Feed Roller Clamp TypeHydraulic
Motor Displacement4.9 CID
Infeed Throat Capacity40 in x 24 in
Filtration Method10 micron return, 100 mesh suction
Oil CoolerYes
Directional ControlYes
Recommended Oil TypeVermeer Hy-Power 68
System TypeOpen center
Special PaintOptional
Extended WarrantyOptional
Preventive MaintenanceOptional
Adjustable Height Discharge ChuteOptional
Remote ControlOptional
Hydraulic OutriggersOptional
Four Position Feed Control BarStandard
Bottom Feed Stop BarStandard
Green Hold to Run ButtonStandard
Reset MethodGreen-hold-to-run button
Positions4: E-stop, Forward, Neutral, and Reverse