TOLL FREE NUMBER: 1800 120 5931
Complete with a 72.4-hp (54-kW) Deutz 2.9 L4 gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for greater control of fuel delivery, fuel economy and optimum combustion. This chipper comes standard with the Vermeer patented EcoIdle™ engine control system and patented SmartFeed technology and has a 12-in (30.5-cm) cutting capacity.
Features and benefits
| Fender Description | Bolt-on steel |
| Hitch Type | Pintle |
| Frame Description | 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness |
| Tongue Extension | Extendable 24" (61 cm) at 12" (30.5 cm) increments |
| Tongue Description | 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) |
| Manufacturer - Option Two | Dexter |
| Capacity - Option Two | 7000 lb (3175.2 kg) |
| Axle/Suspension - Option Two | Torsion |
| Tires - Option One | ST235/80/R16 Load Range E |
| Axle/Suspension | Torsion |
| Wheels - Option Two | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Tires - Option Two | ST235/80R16 Load Range E |
| Capacity - Option One | 5200 lb (2358.7 kg) |
| Manufacturer - Option One | Dexter |
| Type - Option One | Rubber torsional |
| Wheels - Option One | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Type - Option Two | Rubber torsional |
| Trailer Light Type | LED |
| Brake Type | Standard electric or optional hydraulic |
| Manufacturer | Linkbelt |
| Belt Idler/Tensioner | Yes |
| Belt Type | 5V |
| Type | Spherical rollers |
| Rotation Type | Manual rotate with pin lock |
| Rotational Lock | Yes |
| Bedknife - Number of Useable Edges | 4 |
| Bedknife Size | 3.5 " x 17.3 " (8.9 cm x 43.8 cm) |
| Fixture Method | Weld-on |
| Number of Paddles | 5 |
| Knife Size | 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) |
| Safety Lock - Number of Positions | 2 |
| Speed | 2220 rpm |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 4 |
| Useable Edges | 2 |
| Bedknife Material | 1018 |
| Material | A8 chipper steel |
| Radio Remote Control | No |
| Switches | Droop, EcoIdle, and Sensitivity |
| Battery | Group 24; 580 CCA |
| Standard Gauges | Fuel and MFD |
| System Voltage | 12 volt |
| Display | In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road. |
| Controller | Vermeer ACS |
| Deluxe Gauges | Standard |
| Shutdown System | High temp, low pressure |
| Oil Filter | Spin-on |
| Make and Model | Deutz G2.9 L4 |
| Clutch Drive Engagement | Belt tensioner |
| Fan | 18.75-in suction |
| Clutch Type | Clutchless PTO |
| Cooling Medium | Liquid cooled |
| Alternator | 95 amps |
| Recommended Oil | 10W30 |
| Air Cleaner | 2-stage dry with safety element |
| Fuel Type | Unleaded and E10 gasoline |
| Feed Roller Dimension | 20 " x 17 " (50.8 cm x 43.2 cm) |
| Motor Manufacturer | White |
| Number of Feed Roller Motors | 1 |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | 1 |
| Motor Displacement | 28.3 |
| Infeed Throat Capacity | 12 " x 17.5 " (30.5 cm x 43.2 cm) |
| Sound Power | 119 dB(A) |
| Filtration Method | 10 micron return; 100 micron suction |
| Oil Cooler | No |
| Directional Control | Yes |
| Flow Control | No |
| Recommended Oil Type | Vermeer VMF |
| System Type | Open center |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Green Hold to Run Button | Standard |
| Reset Method | Green hold-to-run button |
| Positions | 4: E-stop, forward, neutral, and reverse |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
