TOLL FREE NUMBER: 1800 120 5931
Equipped with mechanical feeding capabilities and a 173-hp (123-kW) John Deere diesel engine, this unit will efficiently work in large land-clearing operations or on a rural jobsite. The AX19 features up to 12,000 lb (5443.1kg) of pull-in force with the support of the patented SmartCrush control system, allowing you to feed large-diameter logs or branchy limbs with minimal effort. With no two jobs alike, the AX19 is built to finish the challenge.
Features and benefits
| Fender Description | Bolt-on |
| Hitch Type | Pintle |
| Frame Description | 7.5" Z-Channel x 0.25" Thick |
| Toolbox Description | Standard |
| Tongue Extension | Extendable 12" |
| Tongue Description | 5" x 3" x 0.375" |
| Tires - Option One | LT285/75R16 Load Range E |
| Axle/Suspension | Tandem Torsion 7000 lb capacity |
| Capacity - Option One | 14,000 (Tandem 7,000 lbs) |
| Manufacturer - Option One | Dexter |
| Type - Option One | TandemTorsion |
| Wheels - Option One | 16" |
| Trailer Light Type | LED |
| Brake Type | Electric |
| Manufacturer | Linkbelt |
| Belt Idler/Tensioner | Spring loaded |
| Belt Type | 5V |
| Type | Spherical Roller |
| Rotation Type | Worm gear with rotational lock |
| Rotational Lock | Self lock |
| Bedknife - Number of Useable Edges | 4 |
| Bedknife Size | 3" x 20.25" |
| Fixture Method | Weld-on |
| Number of Paddles | 12 |
| Knife Size | 0.625 x 5 x 10 |
| Safety Lock - Number of Positions | 4 |
| Speed | 1100 |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 5 |
| Useable Edges | 2 |
| Bedknife Material | 1018 CD |
| Material | A8 Modified Chipper Steel |
| Radio Remote Control | Optional |
| Switches | Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity, Chute controls, Manual Crush |
| Battery | 950 CCA |
| Standard Gauges | Digital Display with tachometer, hourmeter, oil pressure, water temp, battery voltage and engine error codes. Fuel and DEF gauges |
| System Voltage | 12 |
| Display | MFD |
| Controller | Vermeer ACS: C248 |
| Shutdown System | High temp, low pressure, Tier 4 emissions related |
| Oil Filter | Spin-on |
| Make and Model | John Deere 4045HFC09 |
| Clutch Drive Engagement | Manual Lever |
| Fan | 26" Suction |
| Clutch Type | 12" Spring Loaded |
| Cooling Medium | Liquid |
| Alternator | 90 |
| Recommended Oil | ACEA E-7 & E-6 or API CI-4 |
| Air Cleaner | 2 Stage Dry |
| Fuel Type | Diesel |
| Feed Roller Dimension | 19" dia x 28.25 length |
| Motor Manufacturer | White RE470 |
| Number of Feed Roller Motors | 4 |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | 2 |
| Feed Roller Dimension (Two) | 11" dia x 28.25 length |
| Feed Roller Clamp Type | Hydraulic |
| Motor Displacement | 28.4 |
| Infeed Throat Capacity | 28.875" wide x 24" tall |
| Filtration Method | 6 micron return, 100 micron suction |
| Oil Cooler | No |
| Directional Control | Yes |
| Flow Control | No |
| Recommended Oil Type | HY POWER 68 |
| System Type | Open Center |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |
| Adjustable Height Discharge Chute | Optional |
| Remote Control | (Basic or optional Deluxe) |
| Hydraulic Outriggers | Optional (Manual only) |
| Hydraulic Chute Controls | Standard |
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Green Hold to Run Button | Standard |
| Reset Method | Green Hold to Run Button |
| Positions | 4: E-Stop, Forward, Neutral, Reverse |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
| Winch Rope | 9/16" |
| Winch Controls | Forward, Reverse, Free Spool |
| Winch Boom Structure | 0.25 GR50 detachable |
