TOLL FREE NUMBER: 1800 120 5931
The Vermeer SC552 stump cutter is designed to maneuver through tough jobsite conditions. A unique four-bar linkage allows the cutter wheel to move away from the machine as the boom drops down toward the stump, reducing the need to reposition the entire unit. This machine can achieve cutting heights of 31 in (78.7 cm) above ground and 25 in (63.5 cm) below grade. The four wheel drive and variable speed control gives the SC552 traction in difficult ground conditions and, an optional remote provides propel, boom and steering function control. Chips can be easily moved on the jobsite with the standard 34 in (86.4 cm) wide front-mounted chip blade.
Features and benefits
| Frame Description | Welded tube and plate steel |
| Brake Type | Spring applied, hydraulic release at planetary drives and hydrostatic braking (closed loop) |
| Wheels - Standard | Rear: 14" x 6" (35.56 cm x 15.24 cm) |
| Tires - Standard | Rear:Duals, 23x8.5-14 |
| Axle/Suspension | Steerable axle type |
| Steerable Axle Type | Two wheels, hydraulic |
| Control Station Description | Swing out control station with three available positions plus auxiliary control station |
| Toolbox Description | Standard |
| Operator Vision Shield Description | Abrasion resistant coated polycarbonate, 3/16" thick |
| Lower Gearbox | 90 degree |
| Oil Type - Lower Gearbox | Syn 75W90 |
| Driveshaft | Standard |
| Driveshaft - U Joints | 2 standard with double lip seals |
| Number of Indexes | 2 per tooth |
| Number of Teeth | 26 |
| Tooth Description | Yellow Jacket Cutting System |
| Number of Pockets | 26 |
| Cutterwheel Guard | Standard |
| Reversible Pockets/Teeth | Yes- standard |
| Radio Remote Control | Functions include: propel forward/reverse; boom up/down, boom left/right, steering left/right, blade up/down, SmartSweep settings, travel speed high/low, differential lock, throttle |
| Switches | Two-speed ground drive, blade, steering, differential propel lock, SmartSweep settings, cutterwheel engage/disengage, creep, propel system joystick and boom controls joystick |
| Battery | 950 CCA |
| System Voltage | 12 Volt |
| Controller | Vermeer ACS |
| Deluxe Gauges | DP05 Display - Fuel,Hour Meter, Selectible |
| Shutdown System | High coolant temperature, low oil pressure and high hydraulic oil temperature |
| Warning Lights | Low oil pressure, high engine temperature, alternator/charging, wait to start glow plug indicator, high and low hydraulic temp, ACS controller function lights- various functions shown on controller |
| Oil Filter | Cartridge Style |
| Make and Model | Kohler KDI 1903 |
| Fan | Suction |
| Clutch Type | Hydrostatic Transmission |
| Cooling Medium | Liquid |
| Alternator | 100 amp |
| Recommended Oil | SAE 10W30 Low SAPS - ACEA E6-E9 |
| Air Cleaner | Dry type safety element and restriction indicator |
| Fuel Type | Diesel |
| Filtration Method | Suction strainers, one charge pump filter and one 3 micron return filter |
| Recommended Oil Type | Vermeer HyPower 68 |
| System Type | 2 closed loops and 1 open |
| Oil Cooler | Standard |
| Directional Control | Electric over hydraulic |
| Sensor Type | Capacitive Handles |
| Description | Capacitive Handles - Swing/Raise & Lower |
| Visual Interface | Indicator Light/Display |
| Quantity/Location | 2 - Swing Out Station |
| Chip Blade Dimension | Standard - 34 inches wide, 13.75 inches tall |
| Bumper | .75" (1.9 cm) plate |
| Special Paint | Optional |
| Extended Warranty | 2 years/ 2000 hours or 3 years/3000 hours |
| Preventive Maintenance | Optional |
| Radio Remote Control | Optional |
| Remote Display | LED |
| Remote Range | 300' |
| Remote Functions | Engine stop, throttle, cutter wheel engage, swing, raise/lower, propel, creep, smartsweep |
